Printing problem,can you help please??

Q: Hi, i have recently refilled my Lexmark x1180 printer's colour ink.I have done it before without problem but now it is acting up.I know that each of the 3 colours inside are all full yet it shows up as nearly empty and will not print any colour.I have cleaned the contacts with alcohol could this be a problem?Do you have any suggestions?i dont think theres any air in it.Please tell me if i have forgot anything or if you have any ideas.Thankyou!!!

A: Coincidence! I just re-filled my Lexmark's color cartridge. I think you do have some air between the fresh ink and the printhead holes. Sometimes different inks'll react together and clump up in the printhead, and this'll need to be flushed out. Although they make quite a fuss about it, I've never had a problem caused by my cleaning the printhead on the cartridges-and I've used acetone, alcohol and just dunked'em under a stream of hot water from the sink till they bleed yellow, cyan and magenta. Then I dry'em off and blot any oozing ink off the printhead before re-installing them. THEN, it's a good idea to run the print head cleaning cycle several times, until you've established good ink flow. Another trick is to kind of shake the ink down into the printhead pads (internal to the inkwells) sort of like you'd shake down the mercury in an old thermometer. I've also used a cartridge re-filling syringe to pressurize the wells with a few cc's of air injected into the fill hole, while plugging the vent hole in each color's ink well. Sometimes though, the pads are dried beyond re-inkage, and you gotta spring for another (too expensive) cartridge. Good Luck!

Related items